Custom Apparel Bead — Resin with Heat Transfer Printing
We supply apparel bead to garment factories and brands, built in Resin with heat transfer printing for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is colour fastness of dyed beads against perspiration, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Apparel Bead |
|---|---|
| Size | 12 mm |
| Shape | faceted bead |
| Base material | Resin |
| Finish / process | Heat Transfer Printing |
| Colour options | 24 Pantone-matched shades |
| Packing | boxed sets |
| MOQ | 2000 pieces per style per finish |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 15-50 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Epoxy Dome — available on Resin, quoted per position and per colour.
- Dye-Sublimation Printing — available on Resin, quoted per position and per colour.
- Gold Plating — available on Resin, quoted per position and per colour.
- Knitted Structure — available on Resin, quoted per position and per colour.
- Woven Jacquard — available on Resin, quoted per position and per colour.
- Brushed Finish — available on Resin, quoted per position and per colour.
- Yarn Dyeing — available on Resin, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with heat transfer printing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same colour fastness of dyed beads against perspiration.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
Start your apparel bead programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
