Custom Garment Accessory in Nickel-Free Alloy with Epoxy Dome for Outerwear and Jacket Programmes

Custom Garment Accessory — Nickel-Free Alloy with Epoxy Dome

We supply garment accessory to garment factories and brands, built in Nickel-Free Alloy with epoxy dome for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is packing format that keeps small parts from being mixed, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Die-Casting — available on Nickel-Free Alloy, quoted per position and per colour.
• Braided Weave — available on Nickel-Free Alloy, quoted per position and per colour.
• Nickel Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Screen Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Pantone Colour Matching — available on Nickel-Free Alloy, quoted per position and per colour.
• Fringe Finish — available on Nickel-Free Alloy, quoted per position and per colour.
• Chrome Plating — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed packing
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with epoxy dome applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same packing format that keeps small parts from being mixed.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your garment accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.