Custom Patch — PVC with Soft Enamel Fill
We supply patch to garment factories and brands, built in PVC with soft enamel fill for uniform and corporate programmes. On a trim like this the specification that decides the outcome is edge sealing, which decides whether the patch frays, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: packing that arrives mixed and unusable on the line, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Patch |
|---|---|
| Size | 70 x 80 mm |
| Backing | sew-on backing |
| Base material | PVC |
| Finish / process | Soft Enamel Fill |
| Colour options | 24 Pantone-matched shades |
| Packing | boxed sets |
| MOQ | 5000 pieces per style per finish |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; REACH nickel-release test for metal findings |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Debossing — available on PVC, quoted per position and per colour.
- Hard Enamel Fill — available on PVC, quoted per position and per colour.
- Rhinestone Setting — available on PVC, quoted per position and per colour.
- Stamping — available on PVC, quoted per position and per colour.
- Heat-Cut Edge — available on PVC, quoted per position and per colour.
- Pleating — available on PVC, quoted per position and per colour.
- Epoxy Dome — available on PVC, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with soft enamel fill applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same edge sealing.
FAQ
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Which compliance documents do you provide?
We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your patch programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
