Custom Apparel Clip — Nylon Fabric with Stamping
We supply apparel clip to garment factories and brands, built in Nylon Fabric with stamping for denim and workwear programmes. On a trim like this the specification that decides the outcome is teeth finish, because sharp teeth cut the cloth they hold, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Apparel Clip |
|---|---|
| Size | 10 mm |
| Type | trouser clip |
| Base material | Nylon Fabric |
| Finish / process | Stamping |
| Colour options | 8 Pantone-matched shades |
| Packing | reel packed |
| MOQ | 500 pieces per style per finish |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 25-50 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Nickel Plating — available on Nylon Fabric, quoted per position and per colour.
- Injection Moulding — available on Nylon Fabric, quoted per position and per colour.
- Digital Printing — available on Nylon Fabric, quoted per position and per colour.
- Chrome Plating — available on Nylon Fabric, quoted per position and per colour.
- Mirror Polish — available on Nylon Fabric, quoted per position and per colour.
- Stamping — available on Nylon Fabric, quoted per position and per colour.
- Overlocked Edge — available on Nylon Fabric, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with stamping applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same teeth finish.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your apparel clip programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
