Custom Lingerie Accessory in Nickel-Free Alloy with Die-Casting for Outerwear and Jacket Programmes

Custom Lingerie Accessory — Nickel-Free Alloy with Die-Casting

We supply lingerie accessory to garment factories and brands, built in Nickel-Free Alloy with die-casting for denim and workwear programmes. On a trim like this the specification that decides the outcome is profile and edge smoothness, which show through fine fabric, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Rhinestone Setting — available on Nickel-Free Alloy, quoted per position and per colour.
• Brushed Finish — available on Nickel-Free Alloy, quoted per position and per colour.
• Embroidery — available on Nickel-Free Alloy, quoted per position and per colour.
• Piece Dyeing — available on Nickel-Free Alloy, quoted per position and per colour.
• Antique Silver — available on Nickel-Free Alloy, quoted per position and per colour.
• Woven Jacquard — available on Nickel-Free Alloy, quoted per position and per colour.
• Knitted Structure — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with die-casting applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same profile and edge smoothness.

FAQ

Which compliance documents do you provide?

We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

Start your lingerie accessory programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.