Custom Eyelet — Nickel-Free Alloy with Gold Plating
We supply eyelet to garment factories and brands, built in Nickel-Free Alloy with gold plating for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is plating that survives washing and contact with skin, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Eyelet |
|---|---|
| Inner diameter | 4 mm |
| Type | two-part eyelet and washer |
| Base material | Nickel-Free Alloy |
| Finish / process | Gold Plating |
| Colour options | 6 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 2000 pieces per style per finish |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Anti-Rust Treatment — available on Nickel-Free Alloy, quoted per position and per colour.
- Antique Silver — available on Nickel-Free Alloy, quoted per position and per colour.
- Antique Brass Plating — available on Nickel-Free Alloy, quoted per position and per colour.
- Chrome Plating — available on Nickel-Free Alloy, quoted per position and per colour.
- Powder Coating — available on Nickel-Free Alloy, quoted per position and per colour.
- Nickel Plating — available on Nickel-Free Alloy, quoted per position and per colour.
- Hard Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed inner diameter
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with gold plating applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same plating that survives washing and contact with skin.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your eyelet programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
