Custom Eyelet — Polyethylene (PE) with Antique Silver
We supply eyelet to garment factories and brands, built in Polyethylene (PE) with antique silver for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is plating that survives washing and contact with skin, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Eyelet |
|---|---|
| Inner diameter | 8 mm |
| Type | toothed washer eyelet |
| Base material | Polyethylene (PE) |
| Finish / process | Antique Silver |
| Colour options | 6 Pantone-matched shades |
| Packing | packed to your size ratio |
| MOQ | 1000 pieces per style per finish |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; GRS recycled content claim |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Nickel Plating — available on Polyethylene (PE), quoted per position and per colour.
- Antique Silver — available on Polyethylene (PE), quoted per position and per colour.
- Gold Plating — available on Polyethylene (PE), quoted per position and per colour.
- Black Oxide — available on Polyethylene (PE), quoted per position and per colour.
- Epoxy Dome — available on Polyethylene (PE), quoted per position and per colour.
- Gunmetal Plating — available on Polyethylene (PE), quoted per position and per colour.
- Hard Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed inner diameter
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with antique silver applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same plating that survives washing and contact with skin.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Which compliance documents do you provide?
We prepare GRS recycled content claim and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Start your eyelet programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
