Custom Rhinestone — Aluminium with Hard Enamel Fill
We supply rhinestone to garment factories and brands, built in Aluminium with hard enamel fill for denim and workwear programmes. On a trim like this the specification that decides the outcome is wash durability of the setting, measured in cycles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Rhinestone |
|---|---|
| Size | SS40 / 8 mm |
| Type | sew-on stone |
| Base material | Aluminium |
| Finish / process | Hard Enamel Fill |
| Colour options | 6 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 2000 pieces per style per finish |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | REACH and GPSR documentation; CPSIA lead and phthalate testing |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Paint Spray — available on Aluminium, quoted per position and per colour.
- Fringe Finish — available on Aluminium, quoted per position and per colour.
- Black Oxide — available on Aluminium, quoted per position and per colour.
- Rose Gold Plating — available on Aluminium, quoted per position and per colour.
- Ultrasonic Welding — available on Aluminium, quoted per position and per colour.
- Soft Enamel Fill — available on Aluminium, quoted per position and per colour.
- Antique Silver — available on Aluminium, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with hard enamel fill applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash durability of the setting.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
Which compliance documents do you provide?
We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your rhinestone programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
