Custom Rhinestone in Acrylic Rhinestone with Injection Moulding for Outerwear and Jacket Programmes

Custom Rhinestone — Acrylic Rhinestone with Injection Moulding

We supply rhinestone to garment factories and brands, built in Acrylic Rhinestone with injection moulding for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is wash durability of the setting, measured in cycles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Hard Enamel Fill — available on Acrylic Rhinestone, quoted per position and per colour.
• Rose Gold Plating — available on Acrylic Rhinestone, quoted per position and per colour.
• Fringe Finish — available on Acrylic Rhinestone, quoted per position and per colour.
• Beaded Detail — available on Acrylic Rhinestone, quoted per position and per colour.
• Rhinestone Setting — available on Acrylic Rhinestone, quoted per position and per colour.
• Chrome Plating — available on Acrylic Rhinestone, quoted per position and per colour.
• Ultrasonic Welding — available on Acrylic Rhinestone, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with injection moulding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash durability of the setting.

FAQ

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What is the minimum order?

Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.

Start your rhinestone programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.