Custom Eyelet in Nickel-Free Alloy with Die-Casting for Outerwear and Jacket Programmes

Custom Eyelet — Nickel-Free Alloy with Die-Casting

We supply eyelet to garment factories and brands, built in Nickel-Free Alloy with die-casting for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is setting tooling tolerance, which decides whether the line runs clean, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or a supplier who disappears once the deposit is paid. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Chrome Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Black Oxide — available on Nickel-Free Alloy, quoted per position and per colour.
• Brushed Finish — available on Nickel-Free Alloy, quoted per position and per colour.
• Injection Moulding — available on Nickel-Free Alloy, quoted per position and per colour.
• Hard Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
• Die-Casting — available on Nickel-Free Alloy, quoted per position and per colour.
• Ultrasonic Welding — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed inner diameter
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with die-casting applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same setting tooling tolerance.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 3 days.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your eyelet programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.