Custom Rhinestone in Polypropylene (PP) with Pantone Colour Matching for Outerwear and Jacket Programmes

Custom Rhinestone — Polypropylene (PP) with Pantone Colour Matching

We supply rhinestone to garment factories and brands, built in Polypropylene (PP) with pantone colour matching for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is glue activation window on a hot-fix stone, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• UV Printing — available on Polypropylene (PP), quoted per position and per colour.
• Chrome Plating — available on Polypropylene (PP), quoted per position and per colour.
• Rhinestone Setting — available on Polypropylene (PP), quoted per position and per colour.
• Tassel Finish — available on Polypropylene (PP), quoted per position and per colour.
• Sequin Stitching — available on Polypropylene (PP), quoted per position and per colour.
• Fringe Finish — available on Polypropylene (PP), quoted per position and per colour.
• Die-Casting — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with pantone colour matching applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same glue activation window on a hot-fix stone.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 3 days.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your rhinestone programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.