Custom Zipper in Acrylic with Anti-Rust Treatment for Uniform and Corporate Programmes

Custom Zipper — Acrylic with Anti-Rust Treatment

We supply zipper to garment factories and brands, built in Acrylic with anti-rust treatment for uniform and corporate programmes. On a trim like this the specification that decides the outcome is pull strength of the slider and the stop, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: packing that arrives mixed and unusable on the line, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Brushed Finish — available on Acrylic, quoted per position and per colour.
• UV Printing — available on Acrylic, quoted per position and per colour.
• Overlocked Edge — available on Acrylic, quoted per position and per colour.
• Injection Moulding — available on Acrylic, quoted per position and per colour.
• Gunmetal Plating — available on Acrylic, quoted per position and per colour.
• Debossing — available on Acrylic, quoted per position and per colour.
• Dye-Sublimation Printing — available on Acrylic, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed gauge
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with anti-rust treatment applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same pull strength of the slider and the stop.

FAQ

How long does sampling take?

A first sample takes 12 working days, and each revision about 3 days.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

Start your zipper programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.