Custom Zipper in Polypropylene (PP) with Woven Jacquard for E-commerce and Small-Batch Brands

Custom Zipper — Polypropylene (PP) with Woven Jacquard

We supply zipper to garment factories and brands, built in Polypropylene (PP) with woven jacquard for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is slider smoothness across the full length, tested by hand on bulk, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Injection Moulding — available on Polypropylene (PP), quoted per position and per colour.
• Embroidery — available on Polypropylene (PP), quoted per position and per colour.
• Ultrasonic Welding — available on Polypropylene (PP), quoted per position and per colour.
• Die-Casting — available on Polypropylene (PP), quoted per position and per colour.
• Laser Engraving — available on Polypropylene (PP), quoted per position and per colour.
• Antique Silver — available on Polypropylene (PP), quoted per position and per colour.
• Rose Gold Plating — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed gauge
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with woven jacquard applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same slider smoothness across the full length.

FAQ

How long does sampling take?

A first sample takes 7 working days, and each revision about 3 days.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

Start your zipper programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.