Custom Zipper — Aluminium with Braided Weave
We supply zipper to garment factories and brands, built in Aluminium with braided weave for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is pull strength of the slider and the stop, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Zipper |
|---|---|
| Gauge | #3 |
| Type | reverse coil zipper |
| Base material | Aluminium |
| Finish / process | Braided Weave |
| Colour options | 8 Pantone-matched shades |
| Packing | packed to your size ratio |
| MOQ | 5000 pieces per style per finish |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 20-50 days after approval |
| Compliance | REACH and GPSR documentation; REACH nickel-release test for metal findings |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Hard Enamel Fill — available on Aluminium, quoted per position and per colour.
- Rubber Coating — available on Aluminium, quoted per position and per colour.
- Heat Transfer Printing — available on Aluminium, quoted per position and per colour.
- Woven Jacquard — available on Aluminium, quoted per position and per colour.
- Paint Spray — available on Aluminium, quoted per position and per colour.
- Braided Weave — available on Aluminium, quoted per position and per colour.
- Antique Brass Plating — available on Aluminium, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed gauge
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with braided weave applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same pull strength of the slider and the stop.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your zipper programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
