Custom Garment Label — Genuine Leather with Overlocked Edge
We supply garment label to garment factories and brands, built in Genuine Leather with overlocked edge for uniform and corporate programmes. On a trim like this the specification that decides the outcome is legibility at the smallest type size the artwork uses, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Garment Label |
|---|---|
| Size | 40 x 80 mm |
| Type | care content label |
| Base material | Genuine Leather |
| Finish / process | Overlocked Edge |
| Colour options | 24 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 5000 pieces per style per finish |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | REACH and GPSR documentation; azo dye-free declaration |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Embossing — available on Genuine Leather, quoted per position and per colour.
- Rubber Coating — available on Genuine Leather, quoted per position and per colour.
- Embroidery — available on Genuine Leather, quoted per position and per colour.
- Ultrasonic Welding — available on Genuine Leather, quoted per position and per colour.
- Offset Printing — available on Genuine Leather, quoted per position and per colour.
- Heat-Cut Edge — available on Genuine Leather, quoted per position and per colour.
- Digital Printing — available on Genuine Leather, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with overlocked edge applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same legibility at the smallest type size the artwork uses.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Which compliance documents do you provide?
We prepare azo dye-free declaration and the supporting test reports for the destination market.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your garment label programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
