Custom Garment Label — PU Leather with Offset Printing
We supply garment label to garment factories and brands, built in PU Leather with offset printing for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is legibility at the smallest type size the artwork uses, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: shade variation within one carton, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Garment Label |
|---|---|
| Size | 40 x 80 mm |
| Type | care content label |
| Base material | PU Leather |
| Finish / process | Offset Printing |
| Colour options | 6 Pantone-matched shades |
| Packing | boxed sets |
| MOQ | 2000 pieces per style per finish |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | UKCA and REACH documentation; GRS recycled content claim |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Hard Enamel Fill — available on PU Leather, quoted per position and per colour.
- Paint Spray — available on PU Leather, quoted per position and per colour.
- Soft Enamel Fill — available on PU Leather, quoted per position and per colour.
- Embroidery — available on PU Leather, quoted per position and per colour.
- Piece Dyeing — available on PU Leather, quoted per position and per colour.
- Pleating — available on PU Leather, quoted per position and per colour.
- Rubber Coating — available on PU Leather, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with offset printing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same legibility at the smallest type size the artwork uses.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Which compliance documents do you provide?
We prepare GRS recycled content claim and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Start your garment label programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
