Custom Garment Label in Genuine Leather with Laser Engraving for Outerwear and Jacket Programmes

Custom Garment Label — Genuine Leather with Laser Engraving

We supply garment label to garment factories and brands, built in Genuine Leather with laser engraving for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is wash durability of the print or weave, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Overlocked Edge — available on Genuine Leather, quoted per position and per colour.
• Embossing — available on Genuine Leather, quoted per position and per colour.
• Paint Spray — available on Genuine Leather, quoted per position and per colour.
• Sewn Edge — available on Genuine Leather, quoted per position and per colour.
• Anti-Rust Treatment — available on Genuine Leather, quoted per position and per colour.
• Embroidery — available on Genuine Leather, quoted per position and per colour.
• Powder Coating — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with laser engraving applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash durability of the print or weave.

FAQ

Which compliance documents do you provide?

We prepare GRS recycled content claim and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your garment label programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.