Custom Earmuffs & Eye Mask — Polyester with Tie Dyeing
We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in Polyester with tie dyeing for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is headband pressure, because too much tension wakes the wearer — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Earmuffs & Eye Mask |
|---|---|
| Size | travel fold-flat |
| Type | knit earmuffs |
| Material | Polyester |
| Construction / finish | Tie Dyeing |
| Colour options | 24 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 2000 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | UKCA and REACH documentation; EN 71 part 3 for decorative components |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Edge Painting — available on Polyester, quoted per position and per colour.
- Anti-UV Finish — available on Polyester, quoted per position and per colour.
- Tassel Finish — available on Polyester, quoted per position and per colour.
- Anti-Pilling Finish — available on Polyester, quoted per position and per colour.
- Die-Casting — available on Polyester, quoted per position and per colour.
- Hard Enamel Fill — available on Polyester, quoted per position and per colour.
- Flatlock Seam — available on Polyester, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyester
- Construction sample with tie dyeing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same headband pressure.
FAQ
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Start your earmuffs & eye mask programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
