Custom Belt — Interlock Jersey with Epoxy Dome
We supply belt to brands, retailers and uniform programmes, made in Interlock Jersey with epoxy dome for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is edge finish and coating flex, which cracks first on a folded belt — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 30 mm |
| Type | elastic belt |
| Material | Interlock Jersey |
| Construction / finish | Epoxy Dome |
| Colour options | 24 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 300 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | UKCA and REACH documentation; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Placement Printing — available on Interlock Jersey, quoted per position and per colour.
- Epoxy Dome — available on Interlock Jersey, quoted per position and per colour.
- Screen Printing — available on Interlock Jersey, quoted per position and per colour.
- Rubber Coating — available on Interlock Jersey, quoted per position and per colour.
- Gold Plating — available on Interlock Jersey, quoted per position and per colour.
- Black Oxide — available on Interlock Jersey, quoted per position and per colour.
- Powder Coating — available on Interlock Jersey, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Interlock Jersey
- Construction sample with epoxy dome applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same edge finish and coating flex.
FAQ
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
