Custom Earmuffs & Eye Mask — Silk with Anti-Pilling Finish
We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in Silk with anti-pilling finish for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is headband pressure, because too much tension wakes the wearer — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Earmuffs & Eye Mask |
|---|---|
| Size | travel fold-flat |
| Type | heated eye mask |
| Material | Silk |
| Construction / finish | Anti-Pilling Finish |
| Colour options | 24 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 3000 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; EN 71 part 3 for decorative components |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Mercerising — available on Silk, quoted per position and per colour.
- Cable Knit — available on Silk, quoted per position and per colour.
- Ultrasonic Welding — available on Silk, quoted per position and per colour.
- UV Printing — available on Silk, quoted per position and per colour.
- Die-Casting — available on Silk, quoted per position and per colour.
- Paint Spray — available on Silk, quoted per position and per colour.
- Heat-Cut Edge — available on Silk, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Silk
- Construction sample with anti-pilling finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same headband pressure.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
How long does sampling take?
A first sample takes 7 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your earmuffs & eye mask programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
