Custom Earmuffs & Eye Mask in Recycled Polyester (rPET) with Knitted Structure for Outerwear and Jacket Programmes

Custom Earmuffs & Eye Mask — Recycled Polyester (rPET) with Knitted Structure

We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with knitted structure for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is headband pressure, because too much tension wakes the wearer — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.

The failures here are predictable: packing that arrives mixed and unusable on the line, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Flatlock Seam — available on Recycled Polyester (rPET), quoted per position and per colour.
• Water-Repellent Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Beaded Detail — available on Recycled Polyester (rPET), quoted per position and per colour.
• Tie Dyeing — available on Recycled Polyester (rPET), quoted per position and per colour.
• Hard Enamel Fill — available on Recycled Polyester (rPET), quoted per position and per colour.
• Rib Knit — available on Recycled Polyester (rPET), quoted per position and per colour.
• Pantone Colour Matching — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with knitted structure applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same headband pressure.

FAQ

What is the minimum order?

Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

How long does sampling take?

A first sample takes 10 working days, and each revision about 3 days.

Start your earmuffs & eye mask programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.