Custom Belt — Oxford Cloth with Digital Printing
We supply belt to brands, retailers and uniform programmes, made in Oxford Cloth with digital printing for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: a supplier who disappears once the deposit is paid, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 35 mm |
| Type | chain belt |
| Material | Oxford Cloth |
| Construction / finish | Digital Printing |
| Colour options | 12 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 3000 pieces per style |
| Sampling | 10 working days, 4 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Sewn Edge — available on Oxford Cloth, quoted per position and per colour.
- Anti-Pilling Finish — available on Oxford Cloth, quoted per position and per colour.
- Water-Repellent Finish — available on Oxford Cloth, quoted per position and per colour.
- Binding Tape Edge — available on Oxford Cloth, quoted per position and per colour.
- Injection Moulding — available on Oxford Cloth, quoted per position and per colour.
- Stamping — available on Oxford Cloth, quoted per position and per colour.
- Offset Printing — available on Oxford Cloth, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Oxford Cloth
- Construction sample with digital printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 4 days.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
