Custom Belt in Full-Grain Leather with Rubber Coating for Outerwear and Jacket Programmes

Custom Belt — Full-Grain Leather with Rubber Coating

We supply belt to brands, retailers and uniform programmes, made in Full-Grain Leather with rubber coating for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.

The failures here are predictable: inconsistent sizing between production runs, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Water-Repellent Finish — available on Full-Grain Leather, quoted per position and per colour.
• Offset Printing — available on Full-Grain Leather, quoted per position and per colour.
• Anti-Rust Treatment — available on Full-Grain Leather, quoted per position and per colour.
• Machine-Rolled Hem — available on Full-Grain Leather, quoted per position and per colour.
• Enzyme Wash — available on Full-Grain Leather, quoted per position and per colour.
• Heat Transfer Printing — available on Full-Grain Leather, quoted per position and per colour.
• Overlocked Edge — available on Full-Grain Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Full-Grain Leather
3. Construction sample with rubber coating applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.

FAQ

What is the minimum order?

Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your belt programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.