Custom Earmuffs & Eye Mask — French Terry with Anti-UV Finish
We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in French Terry with anti-uv finish for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is headband pressure, because too much tension wakes the wearer — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Earmuffs & Eye Mask |
|---|---|
| Size | kids size |
| Type | heated eye mask |
| Material | French Terry |
| Construction / finish | Anti-UV Finish |
| Colour options | 6 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; REACH nickel-release test for metal findings |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Anti-Pilling Finish — available on French Terry, quoted per position and per colour.
- Cable Knit — available on French Terry, quoted per position and per colour.
- Heat-Cut Edge — available on French Terry, quoted per position and per colour.
- Rubber Coating — available on French Terry, quoted per position and per colour.
- Brushed Finish — available on French Terry, quoted per position and per colour.
- Powder Coating — available on French Terry, quoted per position and per colour.
- Paint Spray — available on French Terry, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed French Terry
- Construction sample with anti-uv finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same headband pressure.
FAQ
Which compliance documents do you provide?
We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.
What is the minimum order?
Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Start your earmuffs & eye mask programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
