Custom Belt — Wood with Sewn Edge
We supply belt to brands, retailers and uniform programmes, made in Wood with sewn edge for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is hole or ratchet engagement, because a belt that slips is returned — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 25 mm |
| Type | braided belt |
| Material | Wood |
| Construction / finish | Sewn Edge |
| Colour options | 8 shades, Pantone matched |
| Packing | gift box |
| MOQ | 3000 pieces per style |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; salt spray test for metal finishes |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Embossing — available on Wood, quoted per position and per colour.
- Rubber Coating — available on Wood, quoted per position and per colour.
- Injection Moulding — available on Wood, quoted per position and per colour.
- Paint Spray — available on Wood, quoted per position and per colour.
- Anti-Rust Treatment — available on Wood, quoted per position and per colour.
- Sewn Edge — available on Wood, quoted per position and per colour.
- Hand-Rolled Hem — available on Wood, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Wood
- Construction sample with sewn edge applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same hole or ratchet engagement.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
