Custom Belt — EVA Foam with UV Printing
We supply belt to brands, retailers and uniform programmes, made in EVA Foam with uv printing for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare UKCA and REACH documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 35 mm |
| Type | braided belt |
| Material | EVA Foam |
| Construction / finish | UV Printing |
| Colour options | 8 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 3000 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | UKCA and REACH documentation; colour fastness to washing, rubbing and light |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Rose Gold Plating — available on EVA Foam, quoted per position and per colour.
- Gunmetal Plating — available on EVA Foam, quoted per position and per colour.
- Moisture-Wicking Finish — available on EVA Foam, quoted per position and per colour.
- Gold Plating — available on EVA Foam, quoted per position and per colour.
- Heat Transfer Printing — available on EVA Foam, quoted per position and per colour.
- Anti-Pilling Finish — available on EVA Foam, quoted per position and per colour.
- Mercerising — available on EVA Foam, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed EVA Foam
- Construction sample with uv printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Start your belt programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
