Custom Belt — Jute with Anti-Pilling Finish
We supply belt to brands, retailers and uniform programmes, made in Jute with anti-pilling finish for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is edge finish and coating flex, which cracks first on a folded belt — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 50 mm |
| Type | elastic belt |
| Material | Jute |
| Construction / finish | Anti-Pilling Finish |
| Colour options | 12 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 300 pieces per style |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | GSO conformity with Arabic labelling; colour fastness to washing, rubbing and light |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Antique Silver — available on Jute, quoted per position and per colour.
- Moisture-Wicking Finish — available on Jute, quoted per position and per colour.
- Rubber Coating — available on Jute, quoted per position and per colour.
- Laser Cutting — available on Jute, quoted per position and per colour.
- Sewn Edge — available on Jute, quoted per position and per colour.
- Soft Enamel Fill — available on Jute, quoted per position and per colour.
- Edge Painting — available on Jute, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Jute
- Construction sample with anti-pilling finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same edge finish and coating flex.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
