Custom Earmuffs & Eye Mask — Horn with Yarn Dyeing
We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in Horn with yarn dyeing for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is headband pressure, because too much tension wakes the wearer — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Earmuffs & Eye Mask |
|---|---|
| Size | travel fold-flat |
| Type | faux-fur earmuffs |
| Material | Horn |
| Construction / finish | Yarn Dyeing |
| Colour options | 12 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; REACH nickel-release test for metal findings |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Warp Knitting — available on Horn, quoted per position and per colour.
- Jacquard Weave — available on Horn, quoted per position and per colour.
- Paint Spray — available on Horn, quoted per position and per colour.
- Stamping — available on Horn, quoted per position and per colour.
- Heat-Cut Edge — available on Horn, quoted per position and per colour.
- Rhinestone Setting — available on Horn, quoted per position and per colour.
- UV Printing — available on Horn, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Horn
- Construction sample with yarn dyeing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same headband pressure.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Which compliance documents do you provide?
We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.
Start your earmuffs & eye mask programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
