Custom Belt — Bone with UV Printing
We supply belt to brands, retailers and uniform programmes, made in Bone with uv printing for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: shade variation within one carton, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 50 mm |
| Type | braided belt |
| Material | Bone |
| Construction / finish | UV Printing |
| Colour options | 6 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; EN 71 part 3 for decorative components |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Epoxy Dome — available on Bone, quoted per position and per colour.
- Anti-UV Finish — available on Bone, quoted per position and per colour.
- Laser Engraving — available on Bone, quoted per position and per colour.
- Black Oxide — available on Bone, quoted per position and per colour.
- Chrome Plating — available on Bone, quoted per position and per colour.
- Screen Printing — available on Bone, quoted per position and per colour.
- Enzyme Wash — available on Bone, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Bone
- Construction sample with uv printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your belt programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
