Custom Belt — Organza with Binding Tape Edge
We supply belt to brands, retailers and uniform programmes, made in Organza with binding tape edge for e-commerce and small-batch brands. On a piece like this the specification that decides whether it sells or comes back is hole or ratchet engagement, because a belt that slips is returned — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 20 mm |
| Type | webbing belt |
| Material | Organza |
| Construction / finish | Binding Tape Edge |
| Colour options | 16 shades, Pantone matched |
| Packing | carded |
| MOQ | 300 pieces per style |
| Sampling | 12 working days, 4 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | REACH and GPSR documentation; colour fastness to washing, rubbing and light |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Fringed Edge — available on Organza, quoted per position and per colour.
- Embossing — available on Organza, quoted per position and per colour.
- Binding Tape Edge — available on Organza, quoted per position and per colour.
- Offset Printing — available on Organza, quoted per position and per colour.
- Epoxy Dome — available on Organza, quoted per position and per colour.
- Powder Coating — available on Organza, quoted per position and per colour.
- Debossing — available on Organza, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Organza
- Construction sample with binding tape edge applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same hole or ratchet engagement.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 12 working days, and each revision about 4 days.
Which compliance documents do you provide?
We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
