Custom Belt — ABS Plastic with Antique Silver
We supply belt to brands, retailers and uniform programmes, made in ABS Plastic with antique silver for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is hole or ratchet engagement, because a belt that slips is returned — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: shade variation within one carton, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 50 mm |
| Type | braided belt |
| Material | ABS Plastic |
| Construction / finish | Antique Silver |
| Colour options | 16 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; GRS recycled content claim |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Digital Printing — available on ABS Plastic, quoted per position and per colour.
- Sanforising — available on ABS Plastic, quoted per position and per colour.
- Hard Enamel Fill — available on ABS Plastic, quoted per position and per colour.
- Anti-Rust Treatment — available on ABS Plastic, quoted per position and per colour.
- Moisture-Wicking Finish — available on ABS Plastic, quoted per position and per colour.
- Laser Engraving — available on ABS Plastic, quoted per position and per colour.
- Overlocked Edge — available on ABS Plastic, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed ABS Plastic
- Construction sample with antique silver applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same hole or ratchet engagement.
FAQ
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
Which compliance documents do you provide?
We prepare GRS recycled content claim and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
