Custom Sleeve & Knee Sleeve — Microfibre with Epoxy Dome
We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Microfibre with epoxy dome for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is recovery after repeated stretching, because a bagged sleeve is dead — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Sleeve & Knee Sleeve |
|---|---|
| Size | L |
| Type | compression sleeve |
| Material | Microfibre |
| Construction / finish | Epoxy Dome |
| Colour options | 24 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 500 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; azo dye-free declaration |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Enzyme Wash — available on Microfibre, quoted per position and per colour.
- Injection Moulding — available on Microfibre, quoted per position and per colour.
- Paint Spray — available on Microfibre, quoted per position and per colour.
- Hard Enamel Fill — available on Microfibre, quoted per position and per colour.
- Woven Jacquard — available on Microfibre, quoted per position and per colour.
- Warp Knitting — available on Microfibre, quoted per position and per colour.
- Brushed Finish — available on Microfibre, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Microfibre
- Construction sample with epoxy dome applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same recovery after repeated stretching.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your sleeve & knee sleeve programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
