Custom Clothing Accessory in Polyethylene (PE) with Sequin Stitching for Denim and Workwear Programmes

Custom Clothing Accessory — Polyethylene (PE) with Sequin Stitching

We supply clothing accessory to brands, retailers and uniform programmes, made in Polyethylene (PE) with sequin stitching for e-commerce and small-batch brands. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Anti-Rust Treatment — available on Polyethylene (PE), quoted per position and per colour.
• Laser Engraving — available on Polyethylene (PE), quoted per position and per colour.
• Embossing — available on Polyethylene (PE), quoted per position and per colour.
• Gold Plating — available on Polyethylene (PE), quoted per position and per colour.
• Tassel Finish — available on Polyethylene (PE), quoted per position and per colour.
• Heat Transfer Printing — available on Polyethylene (PE), quoted per position and per colour.
• Sequin Stitching — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Construction sample with sequin stitching applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

Which compliance documents do you provide?

We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.

Start your clothing accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.