Custom Clothing Accessory — Mother of Pearl with Anti-Pilling Finish
We supply clothing accessory to brands, retailers and uniform programmes, made in Mother of Pearl with anti-pilling finish for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 35 mm |
| Type | detachable collar tip |
| Material | Mother of Pearl |
| Construction / finish | Anti-Pilling Finish |
| Colour options | 12 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; GRS recycled content claim |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Epoxy Dome — available on Mother of Pearl, quoted per position and per colour.
- Antique Brass Plating — available on Mother of Pearl, quoted per position and per colour.
- Anti-Static Finish — available on Mother of Pearl, quoted per position and per colour.
- Brushed Finish — available on Mother of Pearl, quoted per position and per colour.
- Screen Printing — available on Mother of Pearl, quoted per position and per colour.
- Sewn Edge — available on Mother of Pearl, quoted per position and per colour.
- Paint Spray — available on Mother of Pearl, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mother of Pearl
- Construction sample with anti-pilling finish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
Which compliance documents do you provide?
We prepare GRS recycled content claim and the supporting test reports for the destination market.
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Start your clothing accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
