Custom Clothing Accessory — ABS Plastic with Mirror Polish
We supply clothing accessory to brands, retailers and uniform programmes, made in ABS Plastic with mirror polish for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is plating that survives contact with skin and dry cleaning — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 25 mm |
| Type | epaulette |
| Material | ABS Plastic |
| Construction / finish | Mirror Polish |
| Colour options | 8 shades, Pantone matched |
| Packing | carded |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; EN 71 part 3 for decorative components |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Dye-Sublimation Printing — available on ABS Plastic, quoted per position and per colour.
- Pantone Colour Matching — available on ABS Plastic, quoted per position and per colour.
- Fringe Finish — available on ABS Plastic, quoted per position and per colour.
- Sequin Stitching — available on ABS Plastic, quoted per position and per colour.
- UV Printing — available on ABS Plastic, quoted per position and per colour.
- Debossing — available on ABS Plastic, quoted per position and per colour.
- Embossed Grain — available on ABS Plastic, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed ABS Plastic
- Construction sample with mirror polish applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same plating that survives contact with skin and dry cleaning.
FAQ
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Which compliance documents do you provide?
We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your clothing accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
