Custom Clothing Accessory — Nylon Fabric with Injection Moulding
We supply clothing accessory to brands, retailers and uniform programmes, made in Nylon Fabric with injection moulding for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is plating that survives contact with skin and dry cleaning — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 60 mm |
| Type | collar pin |
| Material | Nylon Fabric |
| Construction / finish | Injection Moulding |
| Colour options | 24 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 1000 pieces per style |
| Sampling | 10 working days, 4 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; azo dye-free declaration |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Beaded Detail — available on Nylon Fabric, quoted per position and per colour.
- Placement Printing — available on Nylon Fabric, quoted per position and per colour.
- Sanforising — available on Nylon Fabric, quoted per position and per colour.
- Smocking — available on Nylon Fabric, quoted per position and per colour.
- Binding Tape Edge — available on Nylon Fabric, quoted per position and per colour.
- Epoxy Dome — available on Nylon Fabric, quoted per position and per colour.
- Hot Foil Stamping — available on Nylon Fabric, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Nylon Fabric
- Construction sample with injection moulding applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same plating that survives contact with skin and dry cleaning.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your clothing accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
