Custom Clothing Accessory in Recycled Polyester (rPET) with Epoxy Dome for Denim and Workwear Programmes

Custom Clothing Accessory — Recycled Polyester (rPET) with Epoxy Dome

We supply clothing accessory to brands, retailers and uniform programmes, made in Recycled Polyester (rPET) with epoxy dome for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Debossing — available on Recycled Polyester (rPET), quoted per position and per colour.
• Rhinestone Setting — available on Recycled Polyester (rPET), quoted per position and per colour.
• Overlocked Edge — available on Recycled Polyester (rPET), quoted per position and per colour.
• Placement Printing — available on Recycled Polyester (rPET), quoted per position and per colour.
• Black Oxide — available on Recycled Polyester (rPET), quoted per position and per colour.
• Anti-Pilling Finish — available on Recycled Polyester (rPET), quoted per position and per colour.
• Stamping — available on Recycled Polyester (rPET), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Recycled Polyester (rPET)
3. Construction sample with epoxy dome applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

How long does sampling take?

A first sample takes 14 working days, and each revision about 4 days.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Start your clothing accessory programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.