Custom Gloves — PU Leather with Heat Transfer Printing
We supply gloves to brands, retailers and uniform programmes, made in PU Leather with heat transfer printing for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is seam strength at the finger crotch, which is where gloves split — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.
The failures here are predictable: inconsistent sizing between production runs, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Gloves |
|---|---|
| Size | XL / 10 |
| Type | driving glove |
| Material | PU Leather |
| Construction / finish | Heat Transfer Printing |
| Colour options | 6 shades, Pantone matched |
| Packing | carded |
| MOQ | 3000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | GSO conformity with Arabic labelling; REACH nickel-release test for metal findings |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Digital Printing — available on PU Leather, quoted per position and per colour.
- Edge Painting — available on PU Leather, quoted per position and per colour.
- Woven Jacquard — available on PU Leather, quoted per position and per colour.
- Overlocked Edge — available on PU Leather, quoted per position and per colour.
- Placement Printing — available on PU Leather, quoted per position and per colour.
- Tie Dyeing — available on PU Leather, quoted per position and per colour.
- Yarn Dyeing — available on PU Leather, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed PU Leather
- Construction sample with heat transfer printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam strength at the finger crotch.
FAQ
Which compliance documents do you provide?
We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your gloves programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
