Custom Gloves in Polyethylene (PE) with Anti-UV Finish for Outerwear and Jacket Programmes

Custom Gloves — Polyethylene (PE) with Anti-UV Finish

We supply gloves to brands, retailers and uniform programmes, made in Polyethylene (PE) with anti-uv finish for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is warmth versus breathability for the climate it is sold in — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 3000 pieces per style.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or a supplier who disappears once the deposit is paid. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Placement Printing — available on Polyethylene (PE), quoted per position and per colour.
• Warp Knitting — available on Polyethylene (PE), quoted per position and per colour.
• Anti-Pilling Finish — available on Polyethylene (PE), quoted per position and per colour.
• Offset Printing — available on Polyethylene (PE), quoted per position and per colour.
• Soft Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
• Rotary Screen Printing — available on Polyethylene (PE), quoted per position and per colour.
• Laser Engraving — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Construction sample with anti-uv finish applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same warmth versus breathability for the climate it is sold in.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your gloves programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.