Custom Clothing Accessory — Twill Tape with Powder Coating
We supply clothing accessory to brands, retailers and uniform programmes, made in Twill Tape with powder coating for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 500 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 25 mm |
| Type | lapel brooch |
| Material | Twill Tape |
| Construction / finish | Powder Coating |
| Colour options | 16 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 500 pieces per style |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 15-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Soft Enamel Fill — available on Twill Tape, quoted per position and per colour.
- Moisture-Wicking Finish — available on Twill Tape, quoted per position and per colour.
- Dye-Sublimation Printing — available on Twill Tape, quoted per position and per colour.
- Rose Gold Plating — available on Twill Tape, quoted per position and per colour.
- Hand-Rolled Hem — available on Twill Tape, quoted per position and per colour.
- Chrome Plating — available on Twill Tape, quoted per position and per colour.
- Gunmetal Plating — available on Twill Tape, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Twill Tape
- Construction sample with powder coating applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 500 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Start your clothing accessory programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
