Custom Gloves in Genuine Leather with Digital Printing for Uniform and Corporate Programmes

Custom Gloves — Genuine Leather with Digital Printing

We supply gloves to brands, retailers and uniform programmes, made in Genuine Leather with digital printing for e-commerce and small-batch brands. On a piece like this the specification that decides whether it sells or comes back is seam strength at the finger crotch, which is where gloves split — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.

The failures here are predictable: colour drift between the approved sample and the bulk trim, or packing that arrives mixed and unusable on the line. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Heat Transfer Printing — available on Genuine Leather, quoted per position and per colour.
• Anti-Rust Treatment — available on Genuine Leather, quoted per position and per colour.
• Embossed Grain — available on Genuine Leather, quoted per position and per colour.
• Offset Printing — available on Genuine Leather, quoted per position and per colour.
• Anti-UV Finish — available on Genuine Leather, quoted per position and per colour.
• Rib Knit — available on Genuine Leather, quoted per position and per colour.
• Stamping — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Genuine Leather
3. Construction sample with digital printing applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam strength at the finger crotch.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your gloves programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.