Custom Gloves — Natural Rubber with Binding Tape Edge
We supply gloves to brands, retailers and uniform programmes, made in Natural Rubber with binding tape edge for outerwear and jacket programmes. On a piece like this the specification that decides whether it sells or comes back is seam strength at the finger crotch, which is where gloves split — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Gloves |
|---|---|
| Size | XS / 6 |
| Type | evening glove |
| Material | Natural Rubber |
| Construction / finish | Binding Tape Edge |
| Colour options | 16 shades, Pantone matched |
| Packing | retail ready pack |
| MOQ | 2000 pieces per style |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Anti-UV Finish — available on Natural Rubber, quoted per position and per colour.
- Moisture-Wicking Finish — available on Natural Rubber, quoted per position and per colour.
- Rubber Coating — available on Natural Rubber, quoted per position and per colour.
- Water-Repellent Finish — available on Natural Rubber, quoted per position and per colour.
- Mercerised Finish — available on Natural Rubber, quoted per position and per colour.
- Binding Tape Edge — available on Natural Rubber, quoted per position and per colour.
- Powder Coating — available on Natural Rubber, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Natural Rubber
- Construction sample with binding tape edge applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same seam strength at the finger crotch.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
How long does sampling take?
A first sample takes 10 working days, and each revision about 5 days.
Start your gloves programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
