Custom Clothing Accessory in Genuine Leather with Offset Printing for Uniform and Corporate Programmes

Custom Clothing Accessory — Genuine Leather with Offset Printing

We supply clothing accessory to brands, retailers and uniform programmes, made in Genuine Leather with offset printing for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or shade variation within one carton. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Beaded Detail — available on Genuine Leather, quoted per position and per colour.
• Sequin Stitching — available on Genuine Leather, quoted per position and per colour.
• Die-Casting — available on Genuine Leather, quoted per position and per colour.
• Overlocked Edge — available on Genuine Leather, quoted per position and per colour.
• Dye-Sublimation Printing — available on Genuine Leather, quoted per position and per colour.
• Enzyme Wash — available on Genuine Leather, quoted per position and per colour.
• Binding Tape Edge — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Genuine Leather
3. Construction sample with offset printing applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.

FAQ

Which compliance documents do you provide?

We prepare salt spray test for metal finishes and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

What is the minimum order?

Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.

Start your clothing accessory programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.