Custom Sleeve & Knee Sleeve — Mesh with Warp Knitting
We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Mesh with warp knitting for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is gripper band that holds without cutting circulation — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Sleeve & Knee Sleeve |
|---|---|
| Size | L |
| Type | elbow sleeve |
| Material | Mesh |
| Construction / finish | Warp Knitting |
| Colour options | 16 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 1000 pieces per style |
| Sampling | 12 working days, 3 days per revision |
| Bulk lead time | 25-30 days after approval |
| Compliance | SNI or SIRIM documentation per destination; colour fastness to washing, rubbing and light |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Injection Moulding — available on Mesh, quoted per position and per colour.
- Binding Tape Edge — available on Mesh, quoted per position and per colour.
- Moisture-Wicking Finish — available on Mesh, quoted per position and per colour.
- Rubber Coating — available on Mesh, quoted per position and per colour.
- Sequin Stitching — available on Mesh, quoted per position and per colour.
- Embroidery — available on Mesh, quoted per position and per colour.
- Sewn Edge — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Construction sample with warp knitting applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same gripper band that holds without cutting circulation.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 12 working days, and each revision about 3 days.
Start your sleeve & knee sleeve programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
