Custom Gloves — Natural Rubber with Epoxy Dome
We supply gloves to brands, retailers and uniform programmes, made in Natural Rubber with epoxy dome for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is size grading across a full run, because hands vary more than chests — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.
Specification
| Product | Gloves |
|---|---|
| Size | S / 7 |
| Type | work glove |
| Material | Natural Rubber |
| Construction / finish | Epoxy Dome |
| Colour options | 6 shades, Pantone matched |
| Packing | single polybag |
| MOQ | 2000 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | REACH and GPSR documentation; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Machine-Rolled Hem — available on Natural Rubber, quoted per position and per colour.
- Braided Weave — available on Natural Rubber, quoted per position and per colour.
- Flatlock Seam — available on Natural Rubber, quoted per position and per colour.
- Heat-Cut Edge — available on Natural Rubber, quoted per position and per colour.
- UV Printing — available on Natural Rubber, quoted per position and per colour.
- Water-Repellent Finish — available on Natural Rubber, quoted per position and per colour.
- Digital Printing — available on Natural Rubber, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Natural Rubber
- Construction sample with epoxy dome applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same size grading across a full run.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Start your gloves programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
