Custom Clothing Accessory — Polyester with Injection Moulding
We supply clothing accessory to brands, retailers and uniform programmes, made in Polyester with injection moulding for e-commerce and small-batch brands. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 80 mm |
| Type | collar stay set |
| Material | Polyester |
| Construction / finish | Injection Moulding |
| Colour options | 8 shades, Pantone matched |
| Packing | carded |
| MOQ | 2000 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 20-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Flatlock Seam — available on Polyester, quoted per position and per colour.
- Paint Spray — available on Polyester, quoted per position and per colour.
- Binding Tape Edge — available on Polyester, quoted per position and per colour.
- Digital Printing — available on Polyester, quoted per position and per colour.
- Screen Printing — available on Polyester, quoted per position and per colour.
- Hand-Rolled Hem — available on Polyester, quoted per position and per colour.
- Overlocked Edge — available on Polyester, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyester
- Construction sample with injection moulding applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
Start your clothing accessory programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
