Custom Clothing Accessory — Mesh with Hard Enamel Fill
We supply clothing accessory to brands, retailers and uniform programmes, made in Mesh with hard enamel fill for uniform and corporate programmes. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GSO conformity with Arabic labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 25 mm |
| Type | collar stay set |
| Material | Mesh |
| Construction / finish | Hard Enamel Fill |
| Colour options | 12 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 2000 pieces per style |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GSO conformity with Arabic labelling; azo dye-free declaration |
| Ship to | Jebel Ali (the Middle East) |
What buyers can customise
- Rhinestone Setting — available on Mesh, quoted per position and per colour.
- Hard Enamel Fill — available on Mesh, quoted per position and per colour.
- Anti-Rust Treatment — available on Mesh, quoted per position and per colour.
- Die-Casting — available on Mesh, quoted per position and per colour.
- Edge Painting — available on Mesh, quoted per position and per colour.
- Digital Printing — available on Mesh, quoted per position and per colour.
- Embossing — available on Mesh, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Mesh
- Construction sample with hard enamel fill applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Jebel Ali with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare azo dye-free declaration and the supporting test reports for the destination market.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Start your clothing accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
