Custom Clothing Accessory — Satin with Epoxy Dome
We supply clothing accessory to brands, retailers and uniform programmes, made in Satin with epoxy dome for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 60 mm |
| Type | lapel brooch |
| Material | Satin |
| Construction / finish | Epoxy Dome |
| Colour options | 12 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 2000 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; REACH nickel-release test for metal findings |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Rhinestone Setting — available on Satin, quoted per position and per colour.
- Water-Repellent Finish — available on Satin, quoted per position and per colour.
- Dye-Sublimation Printing — available on Satin, quoted per position and per colour.
- Anti-Pilling Finish — available on Satin, quoted per position and per colour.
- Laser Engraving — available on Satin, quoted per position and per colour.
- Anti-Static Finish — available on Satin, quoted per position and per colour.
- Laser Cutting — available on Satin, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Satin
- Construction sample with epoxy dome applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
How long does sampling take?
A first sample takes 14 working days, and each revision about 3 days.
Start your clothing accessory programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
