Custom Sleeve & Knee Sleeve in Polyethylene (PE) with Laser Cutting for Uniform and Corporate Programmes

Custom Sleeve & Knee Sleeve — Polyethylene (PE) with Laser Cutting

We supply sleeve & knee sleeve to brands, retailers and uniform programmes, made in Polyethylene (PE) with laser cutting for denim and workwear programmes. On a piece like this the specification that decides whether it sells or comes back is compression profile, which has to be even along the limb — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.

The failures here are predictable: a supplier who disappears once the deposit is paid, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare REACH and GPSR documentation so the container clears instead of missing the season it was bought for.

Specification

What buyers can customise

• Die-Casting — available on Polyethylene (PE), quoted per position and per colour.
• Tassel Finish — available on Polyethylene (PE), quoted per position and per colour.
• Applique — available on Polyethylene (PE), quoted per position and per colour.
• Space Dyeing — available on Polyethylene (PE), quoted per position and per colour.
• Moisture-Wicking Finish — available on Polyethylene (PE), quoted per position and per colour.
• Sewn Edge — available on Polyethylene (PE), quoted per position and per colour.
• Yarn Dyeing — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Specification review — measurement, material and target price
2. Material sourcing and a finished sample in the agreed Polyethylene (PE)
3. Construction sample with laser cutting applied
4. Wear and wash test on the actual production fabric, then pre-production sample
5. Bulk production with in-line inspection at cutting, making and finishing
6. Final AQL 2.5 inspection and packing to your ratio

Where it sells

• Retail chains and department stores — repeatable spec, stable reorders
• E-commerce and small-batch brands — low minimums across many designs
• Uniform and corporate programmes — held spec for years of repeat orders
• Promotional and gifting channels — logo application and retail packing
• Cold-weather and travel programmes — packed to the season's delivery window

Packing, testing and delivery

Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Rotterdam or Felixstowe with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same compression profile.

FAQ

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your sleeve & knee sleeve programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.