Custom Clothing Accessory — Poplin with Heat Transfer Printing
We supply clothing accessory to brands, retailers and uniform programmes, made in Poplin with heat transfer printing for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is pin sharpness and the clutch that holds it, since a lost pin loses the garment — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 1000 pieces per style.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or a finish that tarnishes or rubs off after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare SNI or SIRIM documentation per destination so the container clears instead of missing the season it was bought for.
Specification
| Product | Clothing Accessory |
|---|---|
| Size | 35 mm |
| Type | garment chain |
| Material | Poplin |
| Construction / finish | Heat Transfer Printing |
| Colour options | 6 shades, Pantone matched |
| Packing | gift box |
| MOQ | 1000 pieces per style |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | SNI or SIRIM documentation per destination; azo dye-free declaration |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Sewn Edge — available on Poplin, quoted per position and per colour.
- Stamping — available on Poplin, quoted per position and per colour.
- Paint Spray — available on Poplin, quoted per position and per colour.
- Gunmetal Plating — available on Poplin, quoted per position and per colour.
- Embroidery — available on Poplin, quoted per position and per colour.
- Rose Gold Plating — available on Poplin, quoted per position and per colour.
- Smocking — available on Poplin, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Poplin
- Construction sample with heat transfer printing applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Jakarta or Port Klang with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same pin sharpness and the clutch that holds it.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare azo dye-free declaration and the supporting test reports for the destination market.
Start your clothing accessory programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
